DO NOT TRY THIS AT HOME : Rotteneggs.com text files and message bases are for INFORMATIONAL PURPOSES ONLY. DO NOT undertake any project based upon any information obtained from this or any other web site.We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
Is a powder you can buy at places like Walmart, Home Depot, and Lowes for a very low price. As an artist I first fucked around with this stuff to make mould and create a medium that was easy to carve but didn’t need to be fired. A 25 pound bag is about 8 dollars and that much would make about a 5x5x5 foot cube of solid plaster.
Application-
Because of its properties, Plaster could be used for amazingly destructive things, being like a low grade cement mixture that sets in about an hour and is much easier to mix.
The Plaster is originally in liquid form, about as thick as a milk-shake, and hardens to rock. You could, for example, procure a few peices of plywood and some duct tape and set the plywood up flat against someones doorway with a 6 inch gap in the top, push something heavy against it to keep it there and then double tape the edges to prevent leaking, then you can make your plaster on the spot if you want, it only takes about 10 minutes, and then pour it through the slit in the top of the doorway, in liquid for the plaster will run into every nook and imperfection in the door, frame, and surrounding wall and will be impossible to remove from the inside and would take about a month worth of chipping from the outside, and even after that the door would still have to be replaced. you could do this to the entire outside of a house, useing probably only 2 or 3 bags of plaster to finnish the project.
You could do the same thing, but instead fill someones car with the plaster, don’t get caught though, because they are going to have to buy a new car. You could fill their washer or toilet or sinks or drawers or anything else with the stuff.
You can also coat things. you could make a batch in a 5 gallon bucket and spend the night coating their lawn with it, killing the lawn for at least 6 months. or their roof. or again their car. The possibilities with this stuff are endless.
Procedure
This part isn’t really neccicary, the directions are on the bag, but i’ll write it down anyways.
Pour about 2 parts plaster for ever 1 parts water in a bucket and mix, let it get to the consistency of a milk-shake, add plaster and water until its there. when used in construction you use more plaster to make a pastier mix, but thats not important here most of the time, if the plaster is watery, it will just take more time to set, between 1-2 hours, but will adhere more to the surface of what is being plastered, making it harder to remove.
Well, i think thats about it. rate fairly and leave comments and questions.
Edit Page
Message MikeDestroyerOfWorlds
Add Comment
Add to Favorites
Email to Friend
