DO NOT TRY THIS AT HOME : Rotteneggs.com text files and message bases are for INFORMATIONAL PURPOSES ONLY. DO NOT undertake any project based upon any information obtained from this or any other web site.We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
(51 votes) Published: Sep 10, 2005 12:01 p.m. In 2 Favorites Lists Viewed 2311 times
things you need
-bic pen (this is your tube that houses the needle)
-4 or 5" section of guitar string ,second one from the smallest. ( this is your needle)
-tooth brush ( this gets bent like a "7" and joins the pen to the motor)
-an eraser from a pencil (this joins the shaft of the motor to the needle/guitar string)
-small battery operated motor (from a "walkman" or a hand held fan)
-some tape (to join everything together)
making it:
1.take the guitar string and bend a little bit of the end down or up.
2.take out the ink tube of the pen, and cut it to about a 3 or 4" length, now file down the brass tip of the pen to get the ball out, make the hole big enough to allow passage of the needle.
3.insert the needle into the pen.
4.now take the tooth brush and cut off the bristles making it about 4" long. Heat it up in the middle with a lighter and bend it in to a "7" and hold in place untill stiff.
5.tape the pen needle assembly to the tooth brush.
6.now take the eraser from the pencil and shove it onto the shaft of the motor, try to get it as dead center as possible. tape the pen/needle/tooth brush to the motor/eraser assembly, tape the brush to the motor.
7.take the bent part of the needle/guitar stirng and stick it into the eraser, IMPORTANT- the needle must be purposely OFF CENTER of the eraser.
8.now all that is left to do is find a power source, you can use a plug in adapter from a cd player and cut the tip of and join it or you can just use batteries.
Sep 10, 2005 2:03 pm - 3*
Try to get better wuality pictures.
Dont listen to flaav and The Quench, they dont know what they’re talking about.
Sep 10, 2005 2:12 pm - What about sterilizing it, you’ll have a HELL of an infection from hundereds of needle sticks if you don’t sterilize it properly, I think you should replace the Guitar String needle which I beleive is made of Nickle, with something made of Stainless Steel, there’s a reson that medical things are made of Stainless Steel, it’s a safer metal to sterilize.
Also you need MUCH better pictures to get the point accross.
Edit Page
Message loserkid182
Add Comment
Add to Favorites
Email to Friend
