DO NOT TRY THIS AT HOME : Our text files and message bases are for INFORMATIONAL PURPOSES ONLY. DO NOT undertake any project based upon any information obtained from this or any other web site.We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
(164 votes) Published: Mar 19, 2006 3:07 p.m. In 28 Favorites Lists Viewed 1203 times
**Imrpove a BB gun**
Now i know this one is old but yeah i think i should make my own version.. Everything is handy i suppose :D
Ok what you need:-
[1]An airsoft BB gun.. One that doesn’t use gas refills; just spring (well you cant really improve a gas airsoft gun unless you use differant gas’s)
[2]A precicion screw driver set (recomended... A thin knife will do)
[3] A bit of elbow grease
All in all You will have this:-
Now ok First things first is gettin the top cover off your bb gun this is simple.. But u must be carful not to snap the barrel.... Carfully get your screwdriver or knife and just put it under the rim and ease it open a tad. Like so:-
While using your thumb or a peice of small wood or plastic ect to hold the side you have just done up.. Like so:-
Turn the gun around and do the other side like so, This should make the top pop off... This is best to Do it somewhere where you wont lose bits since springs may decicde to fly out (I have left the top on to show you.. If it doesnt come off just pull the top off and push towrds the barrel):-
Once you have done all that you should see 4 things:
1. The barrel
2. The cocking spring
3. The piston srping
4. The piston chamber
Like so:-
(sorry if its a bit unclear)
Now all you need is "The piston spring" To get to this you will need to pull back the piston chamber but not so much that it cocks the gun just so u can get it lose and pull it out! I have supplied a video of this on putfile.com Sry i had the web cam positioned on my shoulder (imagine that hay HAHA) anyway please do say if the video works :) cheers:-
So now u take off the piston spring i told you about ok :D And strecth it out :D i have supplied another video for ppl who may not understand 1. either cause they are retards 2. casue they taken so much crack and dope they cant remember what’s left and right. Now i havn’t done it fully.. Normaly I would use 2 bits of cloth or 2 pliers... But remember not to pull it out so much that when u cock your gun and shoot it it just falls apart because it cant handle the power.
Ok time to put it all back to gether again :) ( wow another video you say?) Yep fraid so.. Just to make things clear on what to do, first things first inside your piston chamber you will find your piston! like so:-
Now i called it the "Piston tab" Cause there aint shit else to call it and it is an important part.. it must be aligned correctly with the piston chamber for it to be able to work i have supplied a picture (no need for a video even a dumbass could work it out)
Now the piston tab must enter the point of entrance directly... Now you may not have to do this if you havn’t removed the piston from the piston chamber.. But i recomend checking it hasnt moved around or come out.. Because it could block/damage your gun and you dont want that, i just told you this so you dont think im an ass for breaking your gun.
Now putting the gun back together is pretty simple... But yet again i have supplied a video (an egg without videos is a bird without feathers :=])
1. make sure you have everything:
Cocking spring.
barrel (if de-tachable *spelling*).
Piston chamber with piston inside in right position (explained above).
Piston spring
top cover
Once u have rounded all these up you must first attach the Cocking spring to the barrel. Once that is done you must then put the piston spring in the piston chamber that has the piston in it and then connect that back to the gun with the piston tab pointing down along with another big tab (dont worry there is a video} Once all done and correctly done (double check) You can put on the top cover...
This is achieved by placing the barrel hole on the front cover first over the barrel making sure the cocking spring is ok (Strechting the cocking spring will not improve power...If anything will make it harder to cock your gun) and then pulling back the front cover and then smacking it in place over the piston chamber
now your done... Here is the video
Now i hope this helps... its more clear i think that other ones... I am sorry if the videos dont work i have supplied a downloads links below if they dont... If you can download porn samples you can donwload this.. I garuntee NO VIRUS’s I HATE the little fuckers... I had a £1500 laptop and it sufferd from a virus! thats about $2700 in your terms... So yeah do feel free to comment... If you really want to make sure add me to msn: marco1992_577@hotmail.com or email me requestiing the videos and i will send them insuring no virus’s are in them! (well duh its through msn hotmail.. its scanned for virus’s)
**NOTE:** This is just incase the links to putfile.com dont work... Also if you know how to put the gun back together you wont need video3.. Its just for people who done understand mechanics and manufactoring.
Mar 19, 2006 3:22 pm - Electric and gas onces you cant imrpovein the same way. im guesing if u fit an eklctric one with a better motor it wilmake it more powerful
Ma 19, 2006 3:36 pm - Good egg. There is no need to pry off the slide, thats an easy way to break the gun. Airsoft guns have pins/screws that can be taken out so the slide can be slimply pulled off, without the risk of breaking something, but the pins/screws can be hard to find.
Mar 19, 2006 3:39 pm - Not this one... I should of explained that but ohwell cant be perfect... this one was just a sliding one that clipped on.. it was £3 down a market around $6-7 and it now has the capability to break a cup, Its very simple one...
Mar 19, 2006 3:46 pm - yeah mine doesnt have screws either.
nice egg, with good effort shown and good pics. bonus for the video.
easy 5*****
btw, what u mean this is old? this is the first i’ve heard of such a mod
Mar 19, 2006 4:21 pm - 4 because almost any airsoft player knows this and cause’ of the fact that the spring wears out real fast after doing this "upgrade".
M r 19, 2006 5:53 pm - Yo Cameron, more often than not spring guns are more powerful than electric guns. Anyway 5* becuase it would help people with a pistol but I have a UHC MP5 SD3 rifle.
Mar 19, 2006 6:25 pm - idk if all electric guns are the same, but all the electric motor in mine does is compress the spring (so it kinda cocks the gun) and the spring fires the bb. so yes, this would work for some electric guns (like mine) as long as the motor still has enough power to compress the spring
Mar 19, 2006 6:37 pm - damn it i wish i had read this before i got rid of my spring powered bb gun and got a co2 powered pistole.
o well 5*, cause you took all that time to do all the pictures and videos and typing.
Mar 19, 2006 9:47 pm - 5*, useful, great pics, clear instructions.
BTW, electric guns SUCK get a pellet gun, or if you can’t at least a gas airsoft. If you don’t wannna spend the money for the gas (cheapass) then at least get a spring. Electric is the crappiest thing you can get.
Mar 20, 2006 7:05 am - Electric guns do not suck. They have electric pistols for around $120 and will go way further than spring pistols. I have an electric MP5 SMG and it shoots 310fps, that’s further than a spring. The only shity electric pistols are the little $30 dollar ones.
Mar 20, 2006 10:10 am - Same thing with a airrifle srping... My grandad has an old .22 airrifle he gbaught ober 55 years ago for £5 - $10 - 12 and the damn thing is still fine and working today.. I strethced the spring in that and god damn is it powerful... But Co2 rifles/pistols are da bomb... I just like cheap littel bb guns to piss around with friends :D
Mar 20, 2006 10:50 pm - 5, great job. HAs anyone other than me tried burning the airsoft pellets. they make a little beacon of black smoke, and a strong flame for about 1 minute.
the day that someone makes an egg that is usefull to every damn user on RE will be a miracle why the fuck did u read and vote it if its useless to you?
Apr 09, 2008 10:49 pm - "Electric guns do not suck. They have electric pistols for around $120 and will go way further than spring pistols. I have an electric MP5 SMG and it shoots 310fps, that’s further than a spring. The only shity electric pistols are the little $30 dollar ones."
wow....487 fps sniper...well l96 pwns your shit =] 4*
Edit Page
Message silversinner
Add Comment
Add to Favorites
Email to Friend
