DO NOT TRY THIS AT HOME : Our text files and message bases are for INFORMATIONAL PURPOSES ONLY. DO NOT undertake any project based upon any information obtained from this or any other web site.We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
(169 votes) Published: Apr 14, 2006 9:52 p.m. In 3 Favorites Lists Viewed 853 times
Ok there is an egg on this in the directory but it just says to put a potatoe on the end of your barrel????like wtf is dat supposed to do except porbably nothing.
so ive decided to tell you how to make a good, functional and easy to make silencer for your gun.
lets say your barrel is 2 inches wide or 5 cm wide(metric people)
this would be how to make it for those dimensions
You will need 2 reducer cuplings from 2 inches wide to 3 inches wide or 5 cm to 8 cm
30 cm or 12 inches long piping with the width of 8cm or 3 inches
pipe glue
drill
cotton wool
what to do
drill holes into the end of the barrel randomly 30cm from the end
glue a reducer cupling 30cm from the end just past the holes with the larger side facing the direction you would fire
glue the 8cm piping to the reducer so that it is over ur barrel.
fill the space between the barrel and the inside of the 8cm barrel with cotton balls.
then close the end with the other reducer making the smaller end the end of your barrel.
done. enjoy
if you have any problems just say it in the comments