DO NOT TRY THIS AT HOME : Rotteneggs.com text files and message bases are for INFORMATIONAL PURPOSES ONLY. DO NOT undertake any project based upon any information obtained from this or any other web site.We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
(175 votes) Published: Jun 25, 2006 2:24 a.m. In 18 Favorites Lists Viewed 3474 times
Ok for my first egg I am going to show you how to make Knuckle Dusters. I know that there is already a whole lot of eggs on making these but alot of them include no picture and very little to no detailed information on making them. I got the idea of making knuckle dusters at school when my friend and I took jewllerry class. Well now to making them.
First is a list of things you will need:
- Hammer.
- Block of 1x4 inch wood.
- .85 inch metal tubing.
- Coat hanger.
- File.
- Soldering iron.
- Solder
- Hacksaw
*********************************
Step 1 Get your block of wood and carve one end so that it is pointy but not sharp.
Like so.
Step 2 Hammer the metal tubing on the block of wood with the end carved. Like So.
When they are together it should look like this.
Step 3 Now using a hacksaw cut along the line in the diagram and take the metal off and you should have a ring.
Step 4 *IMPORTANT* Repeat steps 1, 2 and 3 untill you have a desired amount of rings.
Step 5 Now unravell the coat hanger and make it to a shape that you think will work well with the rings solderd onto it. You may want to use anothe type of metal instead of a coat hanger wire I just find it easy to work with.
Step 6 Now to soldering, Solder the rings onto the top piece of the metal so you have a good strong feeling when you hold them.
Your finished product should looks similar to this.
Jun 25, 2006 2:53 am - Sorry about not having real pictures because i have just recently moved house and the digital camera is at my old place sorry. But thanks for the good rating guys I really apreciate it.
Jun 25, 2006 12:06 pm - 3 cus of the effort. i personally dont like it. its much easier to just weld the ringss together and to the palm piece. but watever u guys want. in fact ill be nice and just not vote. ur welcome
Although the metal rings will be pretty sharp and may cut, doing more damage to yourself. And I don’t know if coat hanger wire is strong/thick enough to handle approximately 100 lbs of force.
I’ll give it a try and post some pics up later. May take a while due to the fact that I don’t know where my sheet metal is.
Jun 25, 2006 10:14 pm - was kinda hard to understand and dindt see what some on the stuff was actualy used for...real pictures or a real picture on the end to see the finished product would make it so much better...3*
Jun 26, 2006 12:23 am - I dont think this will work at all..... The best Knuckle duster i have seen on here was the one made out of paper.... yea paper... o well.... 3*s for the paint pics
Edit Page
Message -_Forrest_-
Add Comment
Add to Favorites
Email to Friend
