DO NOT TRY THIS AT HOME : Rotteneggs.com text files and message bases are for INFORMATIONAL PURPOSES ONLY. DO NOT undertake any project based upon any information obtained from this or any other web site.We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
(83 votes) Published: Jun 26, 2006 5:38 a.m. In 3 Favorites Lists Viewed 443 times
¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
Some Easy Explosives! ( Minta-meh) 1.0 Created On Jun 27, 2006 Created By Minta-meh ¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
Before i start i’d just like to say im working on getting some photos
VERY soon.
Chapter 1 Introduction
Firstly i’d like to say i don’t reccomend making these and if you do, i
take no responsibility
for any damage or harm to anybody. If you do choose to make these
they should be used
carefully as they can easily cause fires.
(a) = insect easy
(e)= easy
(m)=medium
(h)=hard
(s) So fucking hard it’d be like sucking the devils left tit
Index :
1Intro
2.Flare (m)
3. End
I invented this by myself and if there is anything like this i have not
bothered
to check yet. Although with the flare i made an egg on it inmy other
account ( metal hacks )
check if you do not belive me i am just updating it because i thought
i did it SHIT!
FLARE (EASY) by Minta-Meh
Materials / needed :
1. PVC pipe
2. Sparklers (varys on how many u wanna make 20 sparklers make 1
flare)
3. Woodclamp
4. Hack saw
5. Explosive Powder (optional)
Method :
1.Get The PVC pipe and cut a piece 2 or 3 inches long.
2.Crush / grind up all the sparkler powder it dosen’t have to be very
fine!.
3.stuff some tissues in the end of one.
4.Fill the PVC pipe up to the top with the sparklers
(and with the explosive powder (optional) )
5. Using the wood clamp tighten it till its fully compressed once its
done you’ll have to repeat
this process a couple times before you have a full load ready.
6. IGNITON
Get one sparkler and light an inch away from the end hold end onto
the sparkler side a
flame will appear and will start a gigantic hiss as the flame is trying
to get as much oxygen as
possible! I suggest you chuck it as IT SMOKES wildely and the smoke
is toxic because of
the PVC pipe
ENJOY
*Note this is the egg i re-did off my old account if you rate me down for
this please explain
why, im thinking of including a video.*
Chapter 3 End
I hoped you’ve liked these and there are many cool things you can do
with these i aimed the
flame my bike lock i was suprised to hear my bike lock pop open. ( which
bursted under heat)
again if you are gonna rate me down please leave a comment explaining
why and how i can
improove it.
|=minta-meh=|
¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦¦
The End, Thank You For Reading My Egg This egg was created using the RottenEggs Egg Creator
Jun 26, 2006 5:43 am - 1st comment yay! 1st comment.. haha... this seems kinda easy to do.. i might just try it out.. u used the egg maker didnt you? =p 5* anyway
Jun 26, 2006 6:02 am - ^^ true but then it probably wouldnt smoke as much with out the plastic there’d be no smoke. (atleast i don’t think so) if anyone knows can they please tell me.
thanks for the *** guys
Aug 31, 2006 4:30 pm - im a little late 4 this post but oh well. if u use the iron pipe it\’ll smoke but itle be light smoke with a light color, and it definitly wont b toxic. at least i dont think so...
Edit Page
Message minta-meh
Add Comment
Add to Favorites
Email to Friend
