DO NOT TRY THIS AT HOME : Rotteneggs.com text files and message bases are for INFORMATIONAL PURPOSES ONLY. DO NOT undertake any project based upon any information obtained from this or any other web site.We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
(234 votes) Published: Jul 11, 2006 11:02 p.m. In 44 Favorites Lists Viewed 4909 times
This gun is replacing the other full automatic airsoft egg I made because it’s smaller and you don’t need a battery pack for it
Its velocity is over 300 fps if made right and it can hold up to 60 BBs depending on how long your magazine tube is
Things you need
1. an air horn (most junk stores sell them)
2. 2 tubes, airsoft BB size and the next size up (most hobby stores sell them)
3. pvc pipe (paintball barrel size)
4. wide black electrical tape
5. slingshot rubber tubing
6. hot glue gun
7. a round stick
8. and airsoft BBs
the first few pics are from my other egg
How to build
1. cut about 1 cm of rubber tubing and stretch about 1/3 of it around the thicker tube
2. stretch the other 1/3 of the tubing around the smaller tube
3. now get your wide tape and tape around all of the tubes and rubber tubing to form one barrel
4. about centre of the thicker tube, wrap tape around and around so it will become about 1 ½ cm wide
5. glue on the PVC pipe to make a handle and tape around the hot glue with electrical tape
6. now glue the end of the mag (the thicker part) to the red push button nozzle, wait till the glue dries and reinforce it with electrical tape
7. place the red thing onto the can like so
Loading and shooting the gun
1. Drop some airsoft BBs into the muzzle of the barrel and push all of them past the rubber tubing with a round stick and into the reservoir (you might have to do this a few times depending on how many BBs your gun can fit)
2. press down on the spray can button slowly and you should have BBs shooting out at a very fast speed but don’t push down on it too hard or otherwise you will just have a shower of BBs shoot out at the same time
If you have any problems with your gun add me to msn.
jodan.san@hotmail.com
Jul 12, 2006 12:19 am - thats the coolest thing I have ever seen.
I just don’t understand how it works the way it does. where exactly are the bbs held, and how are they able to be shot all in a row like that without using some type of clip?
Jul 12, 2006 8:50 am - thats not how the mag works and plus thats real hard to get to work in the first place. what you could try doing is having the hopper open in and out so when you want to quickly reload BBs just move the thing forward so BBs drop through the resivoir and then when thats done close it again to make it airtight
Jul 12, 2006 10:01 pm - shut da fuk up rival zone im in australia my dad has 3 guns so shut da fuk up u just dnt know da right guys bitch anways 4 for da egg
Jul 13, 2006 8:03 pm - it actually pushes the BBs through the rubber and each shot has built up air pressure behind it to shoot the BB through the tubing so it makes a pop and the BB shoots at over 330 fps and because the resivoir tube is thicker it slowly pushes the BBs to the tubing and also air can go past them to concentrate on each shot that goes past the tubing.
even i dont know exactly how it works even though i made the idea but im telling you it works for sure
Jul 15, 2006 12:09 pm - Yeah, the air rushing over the top of the resevoir creats a vacume which sucks da bbs up into the barrel, its the same thing that makes planes fly.
Jul 17, 2006 1:54 am - I saw something that loaded with a tube like this at a carnival but it loaded from behind. If I can find/get up off my ass to buy an airhorn I’ll try it.
Jul 17, 2006 2:36 am - i think ive seen those before. but i dont know exactly how they work because ive never seen one cut open. one thing you should try if you hate airsoft is usiing small mettal ball bearings that have the same weight as airsoft BBs but only be about 2 mm wide and just change the size of the tubes and rubber
Sep 13, 2006 5:42 pm - i made one of these but instead of using an air horn i used a soda steam co2 canister and holy shit, it fires 8mm solid metal bbs through walls. it also shoots rocks and pencils. its hell good cause it has around 200 shots and it only costs $10 australian to refill. i would recomend that you try this cause i recon that it is about the amount of compretion as a fire extinguisher so ill trie it with paintballs!!!!!
Sep 28, 2006 4:17 pm - I searched all the junk stores and sport stores in my town and I couldn’t find any airhorns. Do you think those computer duster things would work? Or if they’d be weeker or anything cause I’ve never used an airhorn to see how they compare
Oct 07, 2006 7:57 am - i just realised that the air horn air is actually butane gas. and you can buy butane gas from many many stores such as bunnings, mitre 10, and coles. they sell them as lighter refillers and they dont have any push buttons with them so you gotta get one seperately
Oct 13, 2006 6:24 am - you can get those cans but stronger at dick smith they are used to clean keyboards and is high pressured gas cant remember what gas though 5*
Edit Page
Message FL
Add Comment
Add to Favorites
Email to Friend
