DO NOT TRY THIS AT HOME : Rotteneggs.com text files and message bases are for INFORMATIONAL PURPOSES ONLY. DO NOT undertake any project based upon any information obtained from this or any other web site.We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
(47 votes) Published: Jul 19, 2006 3:14 p.m. In 7 Favorites Lists Viewed 255 times
how to biuld a rocket launcher
++++++++++++++++++++++++++++++++++++++++++++++++++++++
first here is a video to see if you want to make it
http://www.youtube.com/watch?v=rBQnD0siKY8
++++++++++++++++++++++++++++++++++++++++++++++++++++++
1) 2″ pipe over 5′ in length to avoid getting blowback in you face
2) Rocket engines, ignitors, lauch controller or any device that puts out about 6v
3) Balsa wood and superglue
Cut balsa wood to a fin-like shape, glue onto rocket motor, put in ignitor, profit. This may sound oversimplified but it really isn’t, we were able to achieve a flight of over 2 city blocks with the launcher horizontal with this exact setup. The deviation on the horizontal axis for this flight was about 3′. The engines are about $3 a piece and each rocket ends up costing us about $4 a piece, so you don’t want to throw them away, but it isnt outrageous. You can of course, use a standard model rocket, however don’t be prepared to get it back in any usable condition, and be sure to take out the parachute.
We are currently trying out new varieties of fins and motor configuration to achieve a steady flight path with regularity, it may take us awhile to get it right, but i assure you, stable flight or not, it’s damn fun. If you have any suggestions as per the launcher or rocket construction, post and i will most likely try it and give you a field report.”
++++++++++++++++++++++++++++++++++++++++++++++++++++++
pics
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
i should not say this but be carfull they hurt if you get hit and they are very unpridictuble