DO NOT TRY THIS AT HOME : Our text files and message bases are for INFORMATIONAL PURPOSES ONLY. DO NOT undertake any project based upon any information obtained from this or any other web site.We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
(143 votes) Published: Sep 24, 2006 7:28 p.m. In 3 Favorites Lists Viewed 3521 times
i used to hack but i do not anymore, so dont say i do this is just for those of you who do can without getting banned, this couldnt have been made without the help with friends at mirc-5cripts.de where you go to get your hacks.
AVOIDING CRC DETECTION
There is a detection method that VAC2 uses called CRC detection. Each file on a computer has a unique signature (CRC) and so each binary and loader has a unique CRC. When you inject a hack into CS the CRC of the hack is loaded into your computer’s memory. VAC2 can see each CRC in memory and if one of them matches a CRC of a hack that VAC2 is looking for, it flags you as cheating, and you will be VAC-banned in a short while.
Okay, let’s get started. The first thing you need to do is locate the hack binary file. Look for a file with the extension ".dll" in the folder your hack is in. For FuRious SP, it will be called FuRiousSP.dll.
This file is compressed, so as of now you will be unable to edit it without corrupting the binary file. You need to have a program that can decompress/compress binary files. This is the best one to use:
Be careful The UPX file is actually under 2 folders, so if you’re not careful when unzipping, you could get a path like C:\\upx201w\\upx201w\\... -- This is bad! You want it to be C:\\upx201w\\..... -- If it’s not like this it won’t work.
Move your hack DLL file (example: FuRiousSP.dll) into C:\\upx201w\\. Now open your Start Menu and click on Run. Type
"cmd" to open the Command window. In the command window, type what you see outlined in red in the image below. Remember to change FuRiousSP.dll to the DLL file of your hack. After this has completed, minimize - don’t close - the command window.
If it’s successful, you now have the decompressed binary file for your hack. Now you will need a Hex Editor program that can modify the file. I recommend this one: here
Install this program, any where you want. You should be able to figure out by yourself how to install it, and if you can’t, you do not deserve to own a computer. Now, open Hex Workshop 4.2, it should look like this:
Go to the File menu, and click Open. Find your decompressed hack file, it should be located at C:\\upx201w\\FuRiousSP.dll, and open that. Now you should see something that looks like the image below. Find a text string (the right side window), and edit something of no importance. For FuRious SP, search for the string "Welcome to FuRious SP". Change those words to anything you want, making sure not to accidentally change anything else.
THIS IS VERY IMPORTANT Any changes you make must be very close to the original DLL! Try changing just a few letters, making sure not to alter the length of a word! If it is changed too much, you will be unable to re-compress it. If you get an error with the next step (compressing), then you have made changed the length of a word, and you should start over and just change a couple of letters.Example: Change "Welcome to FuRious SP" to "Wilcume tu FuRiuus SP" -- that should work! Don’t copy this exact example though, make sure yours is completely unique.
After you have done that, go to the File menu and click Save.(ctrl+f)
Now, you need to compress the file again. Un-minimize the command window and again, type what you see outlined in red in the image below.
Now you have a fully working hack file, that is undetected by VAC! But I bet you want to be sure right? Well here’s one final tool that will help you be sure.Click here for it. Open it and it should look like this:
Click on the "..." button and browse for the backup of your original, unedited, hack DLL file. Then click on the "CRC32" button. In the results section you will see the CRC of the original hack. This is what VAC is trying to find loaded into your memory. The CRC32 of FuRious SP version 11.07 is 0x678242f1.
Now repeat this process, this time browsing for your new, edited DLL file. The CRC should be completely different than the original one. If it is, congratulations, you now have a VAC-proof hack! If not, you suck. Now move the C:\\upx201w\\FuRiousSP.dll file back into your hack directory. Try to load up the game. I recommend testing this out on an unsecure server at first (I tested on single-player CZ) and seeing if it works.
Sep 24, 2006 9:24 pm - I have been hacking on vac 2 since it came out and i have never bought the game thanks to steam client hacks and the www.steamlessproject.nl.
Jun 19, 2007 12:43 pm - ok i have downloaded so many different hacks but none of them work i have a hack called bons4i how can i get it to work? and i do have opengl (i only play on non secure servers and every one hacks so hacking is the only way i even stand a chance ESPECIALLY against knifespeed)
Edit Page
Message jaylbreak
Add Comment
Add to Favorites
Email to Friend
