DO NOT TRY THIS AT HOME : Rotteneggs.com text files and message bases are for INFORMATIONAL PURPOSES ONLY. DO NOT undertake any project based upon any information obtained from this or any other web site.We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
(75 votes) Published: Jan 03, 2007 4:25 p.m. In 2 Favorites Lists Viewed 456 times
An excellent absorption explosive can be made from a solution of PETN, acetone and mineral oil. When any non-gloss paper i.e. newspaper, paperback books,corrugated cardboard, etc... is dipped in a explosive solution and when removed and allowed to dry, the paper will retain its original texture and appearance along with a microcrystaline high explosive incorporated into the fiber content of the paper. This produces a disguised explosive that can be carried into a target area without arousing suspicion.which is the major advantage of the explosive.
Materials:
PETN
Acetone
Mineral oil
Procedure:
1.)Fill a canning jar 2/3 full of acetone and heat until mildly warm by placing the canning jar in a pan or bucket on heat source when it contains the canning jar.
2.)Add PETN to the acetone, a tablespoon a time, while stirring with a stirring rod. Stir the solution until the PETN dissolves. Add more PETN until it no longer dissolves into solution, even after five minutes of stirring. Approx 1/3 lb of PETN will dissolve in every lb of warm acetone used.
3.)Approx 2% mineral should be added to the final solution. This mineral oil will prevent the crystals of PETN from recrystalizing to a noticeable size when the acetone evaporates. The mineral oil will also provide a better texture to the paper when it is dry after the soaking process.
4.)Pour this solution into a large, flat pan and then fill the pan with even sheets of a non gloss paper.The non gloss sheets are used so because glossed sheets are highly glazed and are not that absorbernt.If rolled newspaper is used, unroll it and lay it out evenly in the an. Allow the paper to soak for 30 minutes.
5.)After soaking for 30 minutes, remove the paper and allow to dry for at least 24 hours. DO NOT DRY IN AN OVEN. After the papr has had time to dry, 50 % of its weight will consist of a microcrystaline high explosive intimately incorporated into the fiber content of the paper.
Fingerprints
by *Ace*
Many people beleive that finger prints can be made different when wanting to hide your tracks but you don’t need to cut up your finger at all... in fact here is a way to disfigure your fingerprints without shedding any blood... all you need is a pineapple -- not that canned shit -- a real pineapple.
Cut little slices out of the pineapple and then place them on a table, then take a needle and dig three little holes on the surface of your skin, then place your fingers on the slices of pineapples and leave them there for 30 minutes.
The acid in the pineapple will eat away your prints and change them. Tthis process may be a little painful, from the acid, but you can handle it.
and lastly homemade airsoft gun
materials
metal pipe
pipe cap
drill
firecracker
gun powder(optiontal)
bbs any type tht fit
set up
take the metal pipe put the pipe cap on onside then drill a tiny hole just so a fuse can gent through put cap on pipe m,ust be all metal
how to use it
take of the cap put fuse of firecracker through hole put cap back on pour gun powder down barrel optional then pur bbs in on top finaly hold the gun thiny and light the firecracker wich will proppel the bbs outward hitting you target!!!
sry no pics yet getting them very soon i promis also please do not vote bad because this is from totse.com i am an advertiser who works for them as you can see in my other egg!!!!!!! sry so long
Jan 08, 2007 5:39 pm - acitone is also known as propanone and petn is Pentaerythritoltetranitra e which can be found in small calibar ammo or detnators mineral oil can be found at grocerie store hope tht helped
Edit Page
Message gfeda
Add Comment
Add to Favorites
Email to Friend
