DO NOT TRY THIS AT HOME : Rotteneggs.com text files and message bases are for INFORMATIONAL PURPOSES ONLY. DO NOT undertake any project based upon any information obtained from this or any other web site.We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
(104 votes) Published: Aug 24, 2007 12:02 p.m. In 1 Favorites Lists Viewed 1230 times
THIS EGG IS FOR INFORMATIONAL PURPOSES ONLY. I AM NOT RESPONSIBLE FOR ANY TROUBLE THAT YOU GET INTO WHILE USING MY LOCK PICK.
1st Take your Oral-B Humming Bird out of it’s package you should have something like this.
2nd Twist the bottom of the flosser and the 2 halfs should separate at the water proof seal. Allowing you to have access to the battery and switch and other internal components. Remove the triple A battery. Save it or chuck it.
3rd Remove the blue plastic collar to expose the wiring to the vibrating motor as well as to the switch. On the shaft of the flossier there is a small black rubber o-ring. Don’t loose this or it will make the unit very loud under operation and helps to make the vibrators pulses more consistent.
4th Melt a small hole in the bottom of the outer shell as well as the bottom the internal battery holder. You may need to bend the battery contact out of the way to make room for the wires.
5th With the wire inserted in the hole in the bottom of the lockpick, connect the wires to the terminals for the battery. It doesn’t matter what wire goes to what terminal on this if you don’t reinstall the tripple A battery.
6th Lace the wire through the hole in the bottom of the lockpicks outer shell. If you have left enough extra wire, it would really make life easy for this.
7th Cut the tip off of one of the lock picks you have acquired or made, the hole in the front of the flossier is 3/16th wide, just about perfect to fit the pick into. Use some superglue to affix it to the flosser.
8th Make sure the lockpick is firmly mounted in the end of the flossier and apply a drop of superglue to the bottom of the flossier to make sure the wires won’t rip out.
So there you have it. For about 9.00 and less than a half hour of time you can have your own high powered lockpick. Now obviously pumping 9 volts into a 1.5 volt motor means it will ware out quickly, but if you use it sparingly it can really last a good long time. It will pop most popular padlocks open in seconds with very little effort.
Aug 24, 2007 3:54 pm - It’s one thing when you copy somthing take your own pics and put it in your own words...but what you did...it’s just, with lack of better word, Fucking retarted beyong measure... 5*s and favs.
actually...0* on this and your profile.
Aug 24, 2007 6:40 pm - ive actually heard of this before. Ive heard of these opening locks in seconds. But meh, old and id rather just do it the old fashioned way anyways.
Edit Page
Message Muffinman99
Add Comment
Add to Favorites
Email to Friend
