DO NOT TRY THIS AT HOME : Rotteneggs.com text files and message bases are for INFORMATIONAL PURPOSES ONLY. DO NOT undertake any project based upon any information obtained from this or any other web site.We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
(84 votes) Published: Jan 17, 2008 3:10 p.m. In 1 Favorites Lists Viewed 339 times
Hi, I have been using this site for a while and have finally decided to make an egg. This egg is something i have done in my school many many times.
The Materials
An expo, Sharpie, and pliers
Steps
1.
Use the pliers to take off the top of the Expo. Do this by squeezing about a half inch from the top of the Expo. When the cap pops off take out the ink cartridge/pad.
2. Repeat Step one of the Sharpie (I used a Carter’s Permanent Ink Marker) You should have 2 cartridges like so
3.
Place the SHARPIE ink cartridge into the expo. There should be some sticking out on the end.
4.
Cut the ink cartridge until there is about a 3/4 inch space in the top of the expo.
5.
Replace the cap on the Expo and you are done!
How to Use
Place into your school’s supply of expo markers and the sharpie ink will stain all of the expo boards.
Jan 17, 2008 3:32 pm - In order to get Sharpie off of the dry erase board, you simply just draw over the Sharpie mark and wipe off and then the Sharpie mark will be gone.
that was weird, it had a 4.5 then alle voted 0 now its at 1 star....=/
It’s called being a higher member level. The higher level you are, the more your vote affects the rating.
Now I’m level 24 and you get a sexy 0* let’s see how low it goes