DO NOT TRY THIS AT HOME : Rotteneggs.com text files and message bases are for INFORMATIONAL PURPOSES ONLY. DO NOT undertake any project based upon any information obtained from this or any other web site.We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
(41 votes) Published: May 25, 2008 3:58 p.m. In 7 Favorites Lists Viewed 635 times
The average marijuana is between 6% and 18% THC. In this Egg, you will find out how to make a very potent form of oil that contains 70% pure THC. It takes roughly two and a half hours to make, costs (minus herb cost) about $5 to make, and is incredibly powerful and odorless. Yes, odorless. You can smoke it in a cigarette, no one will know the difference.
How powerful? Consider a bowl of marijuana contains about 12% THC. One drop of this stuff is 70% THC. I put about three drops in a bowl if I’m sharing, two drops if I’m by myself. I smoke just under an 8th ounce per day by myself. I had one pinchie two hours ago with two drops of oil, and I’m still good. Yes, it’s the new Holy Water here.
What you will need:
Everclear: About one shotglass full.
Old TShirt: Clean, but you don’t need anymore. Preferably white.
Metal cup: Ceramic-coated Boy Scout cups work great, with handle.
Container: A Tylenol container works great, but must be small and stay sealed.
Marijuana: This Egg will assume you use about 2 grams, finely shredded.
Electric Stove: Only electrics, with overhead fan.
Eyedropper: The contact-lens solution containers work well.
Patience: Can’t stress that enough.
Getting started:
Take your finely shredded bud, and place into Tylenol container. Pour just enough Everclear into container that the weed floats freely. Shake to hell, shake back from hell. Try to get most of weed particles to be in the Everclear, scrape down off walls of container. Let sit for two hours, swirling around often. The liquid should turn a darker green.
Next step:
Take about one square foot material of the TShirt, and place it over the metal cup. Dent down, to create a funnel going into the metal cup. Pour weed/Everclear mixture into funnel, be sure to get all the particles out of the container and into the funnel. Pick up edges of TShirt, and squeeze the lump of bud to get as much of the liquid into the metal cup as possible.
OPTION:
Take the remaining lump of weed, and repeat the Everclear-in-Tylenol process. You will double your amount of liquid, but it takes another two hours to do.
Cooking:
On a small back burner, turn on LOW and turn on overhead fan. You will never need to raise the temperature past MEDIUM/LOW. Past that temp, you torch the THC and it’s gone. Place your metal cup containing THC liquid onto burner and allow to heat up. Watch the liquid closely, it should bubble slightly but never boil. Stir slowly every few minutes. The liquid should thicken slightly and get really dark, looking almost the color of soy sauce. Remove from heat, place cup at an angle on a towel or something so that the liquid collects in one corner of the metal cup, and allow to cool. It should get more liquified, making it easier to work with.
Finishing up:
While THC oil is cooling, clean up your mess. Turn off stove and fan, dispose of tshirt, put Everclear and other stuff away. After about twenty minutes, the THC oil should be cooled. Take a small smell of it, if it reeks of alcohol you may need to reheat slowly so that it evaporates more alcohol. If the oil is too thick that it doesn’t run somewhat freely, add a small amount of Everclear and swirl around to loosen it. Pour into eyedropper.
Consuming:
There are a few ways to consume this nuclear shit. You can make a foil spoon, put a few drops in, hold a few inches over a lighter and then lower onto flame, suck vapors up with an empty Bic pen tube. I feel like Tyrone Biggums doing this, so no thanks. Another option: pack a bowl, place a few drops in it, let it dry, fire ’er up. Another option: Take a cigarette, dip the tobacco end into the liquid, and let dry.
Extra ramblings:
Do not let the flame get close to the wet oil, it will torch the THC and be useless. Those of you with non-electric stoves, you will have to let the Everclear/THC solution sit in the metal cup under lights for a while for it to naturally evaporate. Do not use a flame stove to heat, it will ignite your kitchen. The oil is odorless, so smoking it in a cigarette is a great way to keep a small buzz going while at work or where ever.
What happens is the alcohol extracts the THC from the weed, as THC is alcohol soluble. While heating on a stove, you are forcing the alcohol to evaporate, leaving THC with just enough liquid (30% of composition) to be used easily. Your weed is now 70% pure, instead of 6%-18%.
You just used about 2 grams of weed, a little over a half-8th. You created a fair amount of liquid that will get you torched by itself, or just a couple drops in the remaining weed will make you consume less. For $5 (Everclear 200mL bottles are about $5.50 here) you just tripled, maybe quadrupled, your bang-for-the-buck.
Check my Egg record, I don’t make it if it doesn’t work well. Have fun, be responsible.
May 25, 2008 5:09 pm - Yeah, I suppose you could. There is 6%-18% THC level in marijuana, there is only a 0.5% THC level in hemp. So one pound wouldn’t really give you much, but it’s possible.
May 25, 2008 5:40 pm - not sure if it would work as ive never smoked weed , ill wait for the others to vote, holding my vote until then.i never smoked weed so thats y i dont know if this would work.
May 25, 2008 5:43 pm - I’m smoking it now, it works.
Once, I tried to light it while the THC oil was still wet, and it sizzled and went out quickly. However, when I exhaled I could taste the stuff. There’s a huge difference between the taste of lighter fumes and the oil burning, it works. I’ve been high all day and barely smoked any actual bud.
May 25, 2008 9:05 pm - I had someone message me about the use of other alcohols in making THC oil.
The only option I would think might work is Bacardi 151, but I would assume you would have to heat it longer and you would have more impurities in your final oil. That could add flavor, or it could fuck it all up. I would suggest just getting Everclear, if you’re 15 you shouldn’t be trying this shit anyways.
ay 25, 2008 9:12 pm - if i’m not mistaken, acetone will work in place of the everclear. some places card for acetone as well though (18+). More information/alternate processes
also if/when it gets dropped I’ll add it to the ’Drop It’ group.
I would suggest just getting Everclear, if you’re 15 you shouldn’t be trying this shit anyways.
Dude, a lot of Everclear has lead in it because n00bs use solder to hold together their stills. You should really try to find an alternative to Everclear, just a little insight.
May 25, 2008 9:24 pm - uhh dude. everclear is a brand name of high proof grain alcohol. what your prolly thinking of is moonshine, which is homemade distilled alcohol. if you go to a liquor store and buy a bottle of everclear there isnt going to be any lead or impuritys in it. its mass manufactured by a company that doesnt intend to have its consumers die from lead posioning or face law suits
if your buying alcohol in a mason quart jar then your not buying everclear your buying moonshine, which is illigal :)
also this is also called green dragon, knew how to make it. got some made up actualy but still nice guide. peace
May 25, 2008 9:49 pm - ah. thought it was the same as green dragon just...distilled down. and no worries rock. i rather inform than flame.
also the "lead" in home distilleries usualy comes from them using car radiators as a condensor.
you can make your own liquor with parts found at hardware stores and it wont be harmful at all but most dont care about that, there in it for the money and its cheaper to not care
Ma 26, 2008 9:32 am - isn’t this the same thing as hash oil? you can substitute everclear for butane or denatured alcohol. since denatured alcohol isn’t meant for consumption, it should leave a cleaner product and evaporate faster.
May 28, 2008 8:02 pm - I’m making more this week...
Should I take some pics, delete this Egg and make a replacement with pics? I’d just try to get at least the deposit back so it would be purely for informative reasons.
I realize it’s going to get dropped instantly, but even Sanchez didn’t like dropping it. That’s why I think that some "drug" Eggs should be allowed if they are constructed properly and are an original idea. (Not like Monir pays attention to the site anyways..)
May 29, 2008 12:00 pm - pics would be nice, but it still rocks / only text. and you can’t delete eggs anymore i don’t think.
if you redo it w/ pics please include all the text you have here as well. then i will add it to the dropped egg directory/group
ay 30, 2008 12:51 pm - Still has this "Delete this Egg" option at the bottom of the screen. I’ve already made the batch, I got impatient waiting for an answer. Maybe next time..
I also tried the method of the "double bubbler" described in that link, I think it works better than the method I first used, but it takes longer.
Edit Page
Message SmurfJuice
Add Comment
Add to Favorites
Email to Friend
