DO NOT TRY THIS AT HOME : Rotteneggs.com text files and message bases are for INFORMATIONAL PURPOSES ONLY. DO NOT undertake any project based upon any information obtained from this or any other web site.We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
(64 votes) Published: Sep 17, 2002 12:00 a.m. In 1 Favorites Lists Viewed 1559 times
Take a 12" section of 3" pvc pipe, a 3’ section 2" pvc pipe, some pvc glue, a 3" to 2" reducer coupler, a 3" dia. end cap with screw ring, an ignitor, some carb & choke cleaner(preffer & some potato’s.
Tak the pipes & glue them to the coupler(coupler glued in between the pipes), next take the threaded end ring & glue it to the end of the 3" pipe, screw in the screw cap(do not glue screw cap in), drill a hole into the 3" pipe big enough for the ingnitor to fit snuggly in, make sure the ignitor sparks(on the inside), let the whole thing dry.
To load put a potato into the muzzle(front tip of the 2" barrel), make sure the potato fits snuggly, open the screw cap on the back, spray for 1 to 2 seconds, & finally screw the cap shut.
To fire, just push the damn button.
Watch out, the potato should fly 150 yards if nothing gets in its way.
Good luck.