DO NOT TRY THIS AT HOME : Rotteneggs.com text files and message bases are for INFORMATIONAL PURPOSES ONLY. DO NOT undertake any project based upon any information obtained from this or any other web site.We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
(26 votes) Published: Dec 22, 2004 6:25 p.m. In 1 Favorites Lists Viewed 707 times
**-READING THIS EGG OR CARRYING OUT ANY OF THE ACTIVITIES DESCRIBED IN THIS DOCUMENT PUTS YOU UNDER VOID THAT YOU CAN NOT HOLD ME/AUTHOR OR ANYONE AFFILIATED IN THE MAKING OF THIS EGG RESPONSIBLE FOR LEGAL OR HEALTH ISSUE-**
alright, now that’s over now to the darts.
what you need- Model rocket engine ( C-class or less)
Hotglue gun
Plywood
Exacto-Blade
BB’s
Metal Rod, 1 inch long
Metal Rasp
Fuse
thin paper tube
Directions: 1.) take model rocket engine and hotglue bb’s to top 2.) Cut 4 Fins out of plywood with exacto-knife 3.) attach fins onto rocket engine and seal with hot glue 4.) sharpen tip of metal rod with rasp and apply to top of rocket engine 4.) stick fuse in end of rocket and apply hotglue to tip of fuse holding it in place.
purpouse: this dart is dangerous, when ejection charge goes off the bb’s go flying producing shrapnel, the rod on tip provides a object to impale objects such a car tires
Dec 23, 2004 8:52 pm - If your very careful you could drill a small hole all the way through the rocket engine and run a fuse through to a Co2 explosive at the end and send shrapnel everywhere